Schwarzbeck Mess - Elektronik

Switch to: deutsche Version
Homepage    Contact    international representatives    Application Notes    Used Equipment    Search
AntennasAntenna Masts / Tripods / AdaptersCDN 0.15 - 230 MHz, IEC 1000-4-6, EN 61000-4-6
EMI-ReceiversHelmholtz Coils / Radiating LoopsAbsorbing clamps / braid current blocking Clamps
LISN Line Impedance Stabilisation NetworksNear field probesPulse Generators
Striplines / TEM-CellsAccessoriesDummy Lamps according to CISPR 15 EN55015
new Products
TypHelmholtz Coils / Radiating Loops
MagTest SystemSystem to test the immunity against magnetic fields acc. MIL-461 E, ISO 11452-8, EN 61000-4-8, SAE J551-17 etc. The system components will be individually configured for your requirements.
HHS 5203-20Helmholtz Coils, circular, diam. 300 mm, 330 A/m for Calibration or Immunity
[Picture]
HHS 5204-36Helmholtz Coils, circular, diam. 400 mm, 2500 A/m 150 kHz MIL-STD 461E
[Picture]
HHS 5204-12Helmholtz Coils, circular, diam. 400 mm, 2500 A/m 500 kHz MIL-STD 461E, files for the MagTest software
[Picture]
VerstärkerAmplifier to drive HHS 5204-36 up to 100 kHz
HHS 5204Helmholtz Coils for Calibration purposes, circular, diam. 420 mm, 5 turns f. 60 A/m
HHS 5210Helmholtz Coils up to 300 A/m constant H field, 1 m x 1 m, 10 turns per coil, EN 61000-4-8, VDE 0847 part 4-8
HHS 5212Helmholtz Coils up to 250 A/m H field, 1.20m x 1.20 m, 10 turns.
HHS 5213Helmholtz Coils 1.25 m x 1.25 m, 50 turns per coil, acc. EN 55103-2 A.2.1.b)
HHS 5215Helmholtz Coils up to 200 A/m constant H field, 1,5 m x 1,5 m, 10 turns per coil
HHS 5215-100Helmholtz Coils up to 2000 A/m constant H field, 1,5 m x 1,5 m, 100 turns per coil
HHS 5218Helmholtz Coils up to 126 A/m constant H field, 1,8 m x 1,8 m, 10 turns per coil
[Picture]
HHS 5201-98Helmholtz Coils circular up to 64 kA/m 200 kHz for DuT size 45 mm.
[Picture]
HHS 5201-6Helmholtz Coils circular up to 2860 A/m 5 MHz for DuT size 45 mm.
FESP 5132Radiating loop diam. 12 cm, 20 turns, 15 Hz to 150 kHz, max 15 A, 2x Banana jack 4mm, ISO 11452-8, MIL-STD 461E RS101, EN 55103 5.18.3.2
Opt. LoopHolder50Calibration fixture to hold FESP 5134-40 in FESP 5132 in a distance of 50 mm acc. MIL461E figure RS101-3.
FESP 5133Loop Sensor / Antenna, 36 turns in 4 layers, diam. 133 mm, EN 55103-1 A.2.b), EN 55103-2 A.4.1 0 – 200 kHz, BNC-connector female.
[Picture]
FESP 5133-7/41Circular shielded loop sensor to determine the magnetic field strength. 36 turns AWG 7/41, diameter 133 mm, distance gauge 7 cm included. MIL 461E RE101 or RS101 alternative test procedures.
[Picture]
FESP 5134-40Loop Sensor / Antenna, diam 4 cm, 51 turns, 0 Hz to 150 kHz, electrostatic shielding, BNC jack.
FESP 5135Radiating coil diam. 0.5 m, 20 turns in one layer, acc. EN 55103-2 A.3.1
SHUNT 9570Low inductive precision high power shunt 0.25 and 1 Ohm 2 kW or 0.5 Ohm 1 kW respectively for best load matching at lower frequency end, cooling fans.