Schwarzbeck Mess - Elektronik

Switch to: deutsche Version
Homepage    Contact    international representatives    Application Notes    Used Equipment    Search
AntennasAntenna Masts / Tripods / AdaptersCDN 0.15 - 230 MHz, IEC 1000-4-6, EN 61000-4-6
EMI-ReceiversHelmholtz Coils / Radiating LoopsAbsorbing clamps / braid current blocking Clamps
LISN Line Impedance Stabilisation NetworksNear field probesPulse Generators
Striplines / TEM-CellsAccessoriesDummy Lamps according to CISPR 15 EN55015
new Products
Typ

LISN Line Impedance Stabilisation Networks

NSLK 8126V-LISN, 9 kHz - 30 MHz, 50 µH + 5 Ohm || 50 Ohm 4 x 16/25 A, 2 x 16 A Schuko and 4 x 16 A CEKON socket, Artificial Hand.
NSLK 8126 Opt. rcfmOption rcfm: Remote Control without power supply for Schwarzbeck receivers
[Picture]
NSLK 8126 Opt. rcpsOption rcps: Remote Control with built in Power Supply for others than Schwarzbeck receivers
NSLK 8127V-LISN, 9 kHz - 30 MHz, 50 µH + 5 Ohm || 50 Ohm, 2 x 16 A Schuko socket, Artificial Hand.
[Picture]
NSLK 8127 Opt.rcfmOption rcfm: Remote Control without power supply for Schwarzbeck receivers
NSLK 8127 Opt. rcpsOption rcps: Remote Control with built in Power Supply for others than Schwarzbeck receivers
NSLK 8127 Opt. PLCOption: Power Line Communication, according to EN 50065-1, selectable ranges: 3 – 9 kHz, 9 – 95 kHz, 95 kHz – 30 MHz.
NSLK 8128V-LISN, 9 kHz - 30 MHz, 50 µH + 5 Ohm || 50 Ohm 4 x 32/50 A, 2 x 16 A Schuko and 4 x 32 A CEKON socket, Artificial Hand.
NSLK 8128 Opt.rcfmOption rcfm: Remote Control without power supply for Schwarzbeck receivers
NSLK 8128 Opt. rcpsOption rcps: Remote Control with built in Power Supply for others than Schwarzbeck receivers
CEKONCEKON CEE three- phase current connector plug jack 16 A and 32 A.
SCHUKOAdapter Schuko plug, receptacle for Great Britain, Singapore, Hong Kong, Switzerland, Australia, New Zealand, USA, Canada, Japan, Taiwan...
NNLK 8121V-LISN, 9 kHz - 30 MHz, 50 µH + 5 Ohm || 50 Ohm, 4 x 50 (100) A, wing terminals (For continuously 100 A add the options cont. high current and cooling fans!)
[Picture] [Data]
NNLK 8121 Opt. rcfmOption rcfm: Remote Control without power supply for Schwarzbeck receivers
NNLK 8121 Opt. rcpsOption rcps: Remote Control with built in Power Supply for others than Schwarzbeck receivers
NNLK 8121 Opt. HochstromOption: cont. high current, additional terminals to bypass the 250 µH prefilter-chokes, provides less voltage drop and less heating.
NNLK 8121 Opt.400/700VOption: 400/700 V Voltage to Neutral / Voltage between lines
NNLK 8121 Opt. LüfterOption: Cooling Fans
NNLK 8129V-LISN, (9) 150 kHz – 30 MHz, 50 µH || 50 Ohm, 4 x 200 (300) A, wing terminals, low voltage drop.
[Picture] [Data]
NNLK 8129 Opt.rcfmOption rcfm: Remote Control without power supply for Schwarzbeck receivers
NNLK 8129 Opt. rcpsOption rcps: Remote Control with built in Power Supply for others than Schwarzbeck receivers
NNLK 8129 Opt.400/700VOption: 400/700 V Voltage to Neutral / Voltage between lines
NNLK 8129 Opt.LüfterOption: Cooling Fans
NNLK 8130V-LISN, (9) 150 kHz – 30 MHz, 50 µH || 50 Ohm, 4 x 400 (500) A, wing terminals, low voltage drop, cooling fans.
[Picture] [Data]
NNLK 8130 Opt.rcfmOption rcfm: Remote Control without power supply for Schwarzbeck receivers
NNLK 8130 Opt. rcpsOption rcps: Remote Control with built in Power Supply for others than Schwarzbeck receivers
NNLK 8130 Opt.400/700VOption: 400/700 V Voltage to Neutral / Voltage between lines
Single path LISN (Automotive) CISPR 25 / ISO 7637
NNBM 8124Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing. Impedance (5µH + 1 Ohm) || 50 Ohm. Max. 70 (100) A. With switchable 50 Ohm load and switchable 1 Mikrofarad capacitor at mains side, single path, BNC female connector.
NNBM 8124 Opt. NOption for NNBM 8124: N-female connector instead of BNC.
NNBM 8125LISN 5 µH || 50 Ohm, 70 (100) A, single path, with switchable 50 Ohm termination and 10 dB attenuator.
[Picture]
NNBM 8125 Opt. ISO 7637-2Option: 1 Mikrofarad capacitor on the mains side switchable. Switched on the LISN conforms to CISPR 25, switched off the LISN is suitable for transient measurements acc. to ISO 7637-2.
NNBM 8126 ALISN 5 µH || 50 Ohm, 70 (100) A, DC 500 V, AC 50 Hz 250 V, AC 400 Hz 110 V.
NNBM 8126 A Opt. DO-160Calibration up to 400 MHz according to DO-160
NNBM 8126 DLISN 5 µH || 50 Ohm, 200 A single path.
[Picture]
NNBM 8126 F HYBLISN 5 µH || 50 Ohm, 400 A single path, for hybrid drives.
NNBM 8125 BCILISN 5 µH || 50 Ohm, 70 (100) A single path, no switchable attenuator, switchable 50 Ohm 50 Watt load for bulk-current injection test.
NNBM 8125 BCI Opt. 200 AOption: 200 A
[Picture]
Two path LISN (Automotive) CISPR 25 / ISO 7637
NNBM 8126 GLISN 5 µH || 50 Ohm, 70 (100) A, two paths, two BNC-connectors
[Picture]
LISN according to MIL 461 MIL 462
NNBL 8225V-LISN (9) 150 kHz - 100 MHz, 50 µH + 5 Ohm || 50 Ohm, 20 A, 50 Hz AC 250 V, single path, Mil. Std. 461/462, CISPR 16
NNBL 8226V-LISN (9) 150 kHz - 100 MHz, 50 µH + 5 Ohm || 50 Ohm, 70 (100) A, 50 Hz AC 250 V, single path, Mil. Std. 461/462, CISPR 16
NNBL 8226-HVV-LISN (9) 150 kHz - 100 MHz, 50 µH + 5 Ohm || 50 Ohm, 70 (100) A, 50 Hz AC 800 V, single path, Mil. Std. 461/462, CISPR 16
NNBL 8226-2V-LISN (9) 150 kHz - 100 MHz, 50 µH + 5 Ohm || 50 Ohm, 70 (100) A, 50 Hz AC 250 V, two path, Mil. Std. 461/462, CISPR 16
[Picture]
Universal LISN
NDTV 8160Universal Delta-, T-, V-LISN
[Manual]
ISN / T-Networks
NTFM 8131T-ISN 150 Ohm asymmetric, BNC-jack 50 Ohm unsymmetric, 2-wire, 400 V, 3 A AC, 9 kHz – 30 MHz, CISPR 22 D1/EN55015-2002
NTFM 8132T-ISN 2-wire for one pair of unshielded symmetrical wires, 10 kHz - 30 MHz, CISPR 22:1997 D1
[Picture]
NTFM 81364 wire ISN, two unscreened single balanced pairs, CISPR 22:1997 D2
NTFM AdapterAdapters e.g. wired for ISDN, 1000 BaseT or for self wiring available on request
NTFM 8158ISN T8 CAT6 (LCL = 75 dB) acc. CISPR 22 edition 5.2, figure D.3. for up to 4 pairs UTP.
CAT5 8158ISN T8 CAT5 (LCL = 65 dB) acc. CISPR 22 edition 5.2, figure D.3. for up to 4 pairs UTP.
CAT3 8158ISN T8 CAT3 (LCL = 55 dB) acc. CISPR 22 edition 5.2, figure D.3. for up to 4 pairs UTP.
Voltage Probes
TK 9417HF-Probe, 2.5 kOhm
[Picture]
TK 9420High-Voltage-Probe, 1.5 kOhm, 4 pF, 9 kHz – 30 MHz, RF < 30 V
VT 9420Plug-In divider 1.5 kOhm for TK 9420 probe for determination of disturbance source impedance
[Picture]
TK 9421High Power Voltage Probe, 1.5 kOhm, 4 pF, 150 kHz – 30 MHz RF < 100 V
TK 9422High Power Voltage Probe, 5 kOhm, 4 pF, (9) 150 kHz – 30 MHz RF < 100 V