HHS 5210-100 - Helmholtz Coils

 
  • Schwarzbeck HHS 5210 Helmholtz Coil

 


Number of turns: 100
Maximum Coil Current: 15 A (5 min.)
Nominal Coil Current: 9 A continuous
Inner side length of the coil: 1.0 m
Electrical side length of the coil: 1.04 m
Maximum Coil Separation: 0.70 m
Usable Frequency Range: DC - 10 kHz
Inductance (per Coil): 31.3 mH
Resonance Frequency (Pair of Coils): >25 kHz
Weight: 36.5 kg
Terminals: 4 mm female
   
The following data is valid for 0.4 m coil distance:
Coil Separation acc. IEC 1000-4-8: 0.40 m
Max. Magn. Field Strength: 2183 A/m (5 min.)
Nominal Magn. Field Strength: 1310 A/m continuous
Magn. Field Strength, 1 A Coil Current:

145.54 A/m (Coil Dist. 0.4 m)

The following data is valid for 0.566 m coil distance:
Coil Separation for best uniformity along an axes through the coil center: 0.566 m
Magn. Field Strength, 1 A Coil Current: 124.66 A/m (Coil Dist. 0.566 m)
Recommended Accessories: NFCN 9732-120

 

Datasheet HHS 5210-100

 

 Recommended Accessories:

 

NFCN 9732-120 - Compensation Network

 

The compensation network NFCN 9732-120 consists of a capacitor and a fuse in series. It is used for a series compensation of the HHS 5210-100 at energetical mains frequencies of 50 Hz to 60 Hz.

 

The compensation capacitor reduces the total impedance of the series circuitry consisting of the Helmholtz coils HHS 5210-100 and the NFCN 9732-120 at the operating frequencies of 50 to 60 Hz. It allows continuous currents of up to 8 A rms at generator voltages of less than 70 Vrms ...80 Vrms .

 

Datasheet NFCN 9732-120