Accessories

  • CCA for 9108A_9124_9177
  • CCA

CCA

 

CCA product transport cases keep
your equipment safe, at any time. During
transport or for safe storage.

 

Individual for your product.

 

A combination of products in one case are possible.

 

More infomation about CCA and some examples are
shown in the Datasheet.

 

pdficon small Datasheet CCA

 


 
  • CVP 9222 C
  • CVP 9222 C_2
  • CVP 9222 C_3

 CVP 9222 C

 

High Impedance Capacitive Voltage Probe

acc. to CISPR 22

EN 55022 C 1.3

Frequency range: 9 kHz - 100 MHz

 

pdficon small Datasheet CVP 9222 C

 

Options:

Option ACS 110:Charger ACS 110 for CVP 9222, CVP 9222 B and CVP 9222 C.

Option CAL 9222 B: Calibration Adapter for CVP 9222, CVP 9222 B and CVP 9222 C.

 

pdficon small Datasheet CAL 9222 B

 


  • CP 9610
  • CP9610

 

 CP 9610

 

The current sensor CP 9610 can measure up to 40 A in a frequency range from DC – 1 MHz. It is galvanically isolated and can withstand a maximum voltage of 210 VPK / VDC. The internal resistance of the conductive path is less than 3 mΩ, providing low power loss. The hall transducer is temperature compensated and allows high accuracy over temperature.

 

Frequency Range:  DC - 1 MHz
Output Connector:  BNC (1 MΩ)
Current Sensing Range:  -40 A - +40 A
Nominal conversion factor:  50 mV/A
Internal Conductor Resistance:  < 3 mΩ
Typical Output Error:  ±3 %
Dimension:  105 x 44 x 115 mm
Typical Operation Time:  24 h
EuT Connector:  Wing terminals
Power Supply:  3.7 V, 2.6 Ah Lithium Ion
Weight:  430 g

 

pdficon small Datasheet CP 9610

 


 
  • SW 9602 - Current Transformer

 

SW 9602

 

Current Transformer

shielded

0.01 - 200 MHz

Transfer Impedance: 1 Ohm for wires up to 6.5 mm

 

Datasheet SW 9602

 


 
  • Schwarzbeck SW 9603 Current Transformer

 

SW 9603

 

Current Transformer

shielded

9 kHz - 150 MHz

Transfer Impedance: 1 Ohm for wires up to 14 mm

 

Datasheet SW 9603

 


 
  • SW9605

 

SW 9605

 

Current Transformer Clamp

CISPR 22

9 kHz - 80 MHz

Transfer Impedance: 1 Ohm for wires up to 23 mm

 

Datasheet SW 9605

 


 
  • SW 9606

 

SW 9606

 

Current injection clamp

for RF current injection into harnesses

up to 23 mm diamter

transducer 18 dB

 

Datasheet SW 9606

 

 

  • CA_9608 with SW_9606
  • Schwarzbeck CA 9608 Calibration Adapter

 

CA 9608

 

Universal calibration adapter for e.g. the following current clamps:

R&S ESV-Z1, Prodyn, IT-050-1

length and height settable

 

Datasheet CA 9608

 

 

 
  • Schwarzbeck TF-130-150 close
  • Schwarzbeck TF-130-150 open

 

TF 130-150

 

Test Fixture for Ford RI 130/ 150 Per EMC-CS-2009

 

Datasheet TF 130-150

 

 

 
  • Schwarzbeck SY9223-17 Wideband Transformer

 

CISPR 17 Equipment

 

Transformers

fixtures and adapters to measure filters

ferrites and other passive components.

Detailed product list and data sheets on request.

 

Datasheet CISPR 17 Equipment

 

 

 

 

BD 9501

 

IEEE-488 Bus-Feed through for flange mounting

(shielded rooms) (other feed throughs on request)

 

Datasheet BD 9501

 

 

 

  • HPF150k

 

HPF 150 k - High Pass Filter

 

The HPF is a passive LC-Filter with female N-connectors in shielded metal housing with very steep slope according to CISPR 16-1-1.

The main application is the elimination of noise below 150 kHz for conducted interference voltage measurements. Particular features are high pulse load capacity and dielectric strength.

 

 

Frequency range:  9 kHz - 30 MHz
Fundamental frequency:  150 kHz
Nominal impedance:  50 Ω
Continuous power:  100 W
Passband loss:  typ. < 2 dB
Passband VSWR:  typ. < 2
Stopband loss:  >50 dB @ ≤ 130 kHz
Housing material:  Aluminium
Housing dimensions:
(with connector)
 50 x 105 x 240 mm
Weight:  860 g
Connector:  2 x N female

 

 

Datasheet HPF 150 k

 


 
  • Schwarzbeck HPF High Pass Filter

 

HPF - High Pass Filter

 

35 - 1000 MHz

Insertion loss at 27.12 MHz typ. 100 dB

 

Datasheet HPF

 

 

 
  • Schwarzbeck CCC9224 Kapazitive Koppelzange

 

CCC 9224

 

Capacitive coupling clamp for transients acc. to ISO 7637-3 or DC-10614 B.5.

 

pdficon small Datasheet CCC 9224

 

 

 

 

  • Schwarzbeck CCP 9225 Capacitive Coupling Plate

 

CCP 9225

 

Capacitive coupling plate

The main application is to conduct CV-tests (capacitive voltage measurements).

The capacitive coupling plate CCP 9225 complies to the automotive manuafacturer standard MBN 10284-2 2011-04, Annex B.

 

pdficon small Datasheet CCP 9225

 


 

KU 9608

 

Coaxial- and line switch for measurement of the attenuation of fluorescent lighting fittings

 

pdficon small Datasheet KU9608