NSLK 8127

V-LISN, 9 kHz - 30 MHz

50 µH + 5 Ohm || 50 Ohm

2 x 16 A Schuko socket

Artificial Hand

Datasheet NSLK 8127

Options:

Opt. RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

NSLK 8127 Opt. RC

 Opt. PLC:

Option: Power Line Communication, according to EN 50065-1, selectable ranges: 3 - 9 kHz, 9 - 95 kHz, 95 kHz - 30 MHz.

NSLK 8127 Opt. PLC

NSLK 8126

V-LISN

9 kHz - 30 MHz

50 µH + 5 Ohm || 50 Ohm

4 x 16/25 A

2 x 16 A Schuko and 4 x 16 A CEKON socket

Artificial Hand

Datasheet NSLK 8126

Options:

Opt. RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

NSLK 8126 Opt. RC

NSLK 8128

V-LISN, 9 kHz - 30 MHz

50 µH + 5 Ohm || 50 Ohm

4 x 32/50 A

2 x 16 A Schuko and 4 x 32 A CEKON socket

Artificial Hand.

Datasheet NSLK 8128

Options:

Opt. RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

NSLK 8128 Opt. RC

NNLK 8121

V-LISN

9 kHz - 30 MHz

50 µH + 5 Ohm || 50 Ohm

4 x 50 (100) A

wing terminals

(For continuously 100 A add the options cont. high current and cooling fans!)

Datasheet NNLK 8121

Data

 Options:

 Opt. RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

NNLK 8121 Opt. RC

 Opt. Hochstrom

Option: cont. high current, additional terminals to bypass

the 250 µH prefilter-chokes, provides less voltage drop

and less heating.

NNLK 8121 Option Hochstrom

 Opt. 400/700V

 Option: 400/700 V Voltage to Neutral / Voltage between lines

 Opt. Lüfter

 Option: Cooling Fans

Opt. TC

The temperature monitor modul which is optional available for the NNLK LISN warns the user optical and acoustical when the temperature pets too high. It controls the fans of the LISN temperature-dependent, too and thus prevents overheating. If the critical temperature of 115°C is reached the temperature control modul indicates this optical and acoustical.

NNLK 8121 Opt. TC

NSLK 8122

Datasheet NSLK 8122

NNLK 8129

V-LISN

(9) 150 kHz - 30 MHz

50 µH || 50 Ohm

4 x 200 (300) A

wing terminals

low voltage drop.

Datasheet NNLK 8129

Data

Options:

Opt.RC:

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke. 

NNLK 8129 Opt. RC

Opt.400/700V:

400/700 V Voltage to Neutral / Voltage between lines

Opt.Lüfter:

Cooling Fans

Opt. TC

The temperature monitor modul which is optional available for the NNLK LISN warns the user optical and acoustical when the temperature pets too high. It controls the fans of the LISN temperature-dependent, too and thus prevents overheating. If the critical temperature of 115°C is reached the temperature control modul indicates this optical and acoustical.

NNLK 8121 Opt. TC

NNLK 8130

V-LISN

(9) 150 kHz - 30 MHz

50 µH || 50 Ohm

4 x 400 (500) A

wing terminals

low voltage drop

cooling fans

Datasheet NNLK 8130

Data

Options:

Opt. RC

Option RC for LISN: Remote Control with built in power supply. LISN can be controlled by R&S or Schwarzbeck code, including remote control cable for your receiver type (Please specify your receiver type!). LISN can be selected from the R&S receiver menu or in the EMC32 software like an R&S LISN. No programming of the user interface necessary. Functions: path selection and PE grounded or via choke.

NNLK 8130 Opt. RC

Opt. TC

The temperature monitor modul which is optional available for the NNLK LISN warns the user optical and acoustical when the temperature pets too high. It controls the fans of the LISN temperature-dependent, too and thus prevents overheating. If the critical temperature of 115°C is reached the temperature control modul indicates this optical and acoustical.

NNLK 8121 Opt. TC

NNLK 8140

Single Path V-LISN

(9) 150 kHz – 30 MHz

50 µH || 50 Ohm

1 x 800 A continuously (1000 A short time)

wing terminals

low voltage drop

High power resistors

cooling fans.

Max. Voltage: 1000 V DC or 650 V AC 50/60 Hz.

Datasheet NNLK 8140

Opt. TC

The temperature monitor modul which is optional available for the NNLK LISN warns the user optical and acoustical when the temperature pets too high. It controls the fans of the LISN temperature-dependent, too and thus prevents overheating. If the critical temperature of 115°C is reached the temperature control modul indicates this optical and acoustical.

NNLK 8121 Opt. TC