The MDS 21 C complies to all requirements of CISPR 16-1-3 and will be delivered including an individual calibration of the clamp factor CF. When ordered at the same time, the 6 dB attenuator and the N-angle adapter will be included into the clamp calibration.
The calibration jig KA MDS21 is used to calibrate the clamp factor CF and decoupling factors DF and DR of absorbing clamps of the type MDS 21 C.
The CMAD 1614 – Common Mode Absorption Device (Clamp) consists of many precision cut ferrite half-toroids, which are embedded in a grey plastic housing. The unique floating toroid bearing ensures a perfect fit of the ferrite surfaces. Two quick-locks at…
The CAL CMAD 1614 calibration fixture is used to calibrate / verify the performance of the common mode absorption device CMAD 1614. The fixture consists of an aluminium base plate with two sideplates, adjustable in height and position and each of them equipped with N-connector and inner conductor fixture. A variety of inner conductors with 4 mm diameter is part of the delivery. The calibration fixture was designed for measurements acc. to CISPR 16-1-4 sections 9.5 and 9.6.