HFRA 5153 – Transmit Loop Antenna for Calibrations
The transmit loop antenna HFRA 5153 was designed to generate well defined magnetic fields with moderate fieldstrength levels (< 0.1 A/m) in the frequency range up to 30 MHz. With slightly reduced performance the loop can be used in the frequency range up to 50 MHz.
The loop, consisting of one turn, is shielded against E-fields. The nickel-plated brass housing contains a series resitor of 10 Ohm, which is used to monitor the loop current using a high impedant voltage measuring equipment (e.g. Oscilloscope, Voltmeter). The loop current (monitor voltage) is directly proportional to the generated Magnetic Field-strength.
The HFRA 5153 is equipped with two female BNC-connectors. One of them can be used to feed the loop, the other can be used to monitor the voltage with a voltmeter (high impedance).
The HFRA 5153 loop can be mounted on a tripod (e.g. AM 9144) and comes with a female camera thread 3/8″
| Frequency Range: | 0-30 (50) MHz |
| Input Impedance: | typ. 450 W |
| Number of turns: | 1 |
| Loop diameter: | 180 mm |
| Maximum Loop Current: | 100 mA / 100 dBµA |
| Maximum Voltage at the Current Monitor Terminal: | 1 V / 120 dBµV |
| Maximum Power: | 4 W |
| Mechanical Dimensions: | 230 x 190 x 80 mm |
| Terminals: | 2 x BNC |
| Mount: | 3/8" |
| Weight: | 350 g |