| FSH3D (active) | FSE3D (active) | FSHPH (passive) | FSHPE (passive) | |
|---|---|---|---|---|
| Frequency Range (nominal) | 9 kHz – 200 MHz | 30 MHz – 3 GHz | 9 kHz – 300 MHz | 9 kHz – 300 MHz |
| Frequency Range (usable) | 9 kHz – 300 MHz | 10 MHz – 3.3 GHz | N/A | 9 kHz – 500 MHz |
| Connector | N-male | N-male | N-female | N-female |
| Power Supply | 5 V DC < 100 mA | 5 V DC < 100 mA | N/A | N/A |
| Power Supply and Logic Connector | Binder 99-0421-10-07 Serie 712 | Binder 99-0421-10-07 Serie 712; other available | N/A | N/A |
| Antenna Factor for E-fieldstrength | 42…70 dB/m (fictional) | 26…33 dB/m | 23…60 dB/Ohm m, 74.5…111.5 dB/m | 36…130 dB/m |
| VSWR | typ. < 1.5 (20 kHz – 50 MHz) | typ. 1.3…1.7 | typ. < 1.7 | typ. < 1.8 |
| Decoupling of the Axis | typ. > 20 dB/m | typ. 20 dB | N/A | N/A |
| 1 dB Compression at Output | typ. 118 dBμV | 30 MHz: 142.5 dBµV/m; 300 MHz: 141.0 dBµV/m | N/A | N/A |
| Dimensions | 550 x 146 x 146 mm | 550 x 146 x 146 mm | 510 x 145 x 80 mm | 510 x 145 x 80 mm |
| Weight | 850 g | 820 g | ca. 750 g | ca. 700 g |
| Environmental Conditions | -10°C – +50°C, IP54 | -10°C – +50°C, IP54 | -10°C – +50°C, IP54 | -10°C – +50°C, IP54 |
| Compatibility with Handheld Spectrum Analyzers | R&S FSH-Series and Anritsu Spectrum Master | R&S FSH-Series and Anritsu Spectrum Master | R&S FSH-Series, Keysight Fieldfox, Anritsu Sitemaster, LMR-Master, Spectrum Master, Aeroflex 9100, many more… | R&S FSH-Series, Keysight Fieldfox, Anritsu Sitemaster, LMR-Master, Spectrum Master, Aeroflex 9100, many more… |
The FSH3D consists of three identical, shielded loop antennas, which are aligned perpendicularly to each other. A shielded unit follows, containing the switching and amplifier circuitry, which is directly connected to the N-male output and fed by the Binder-connector with…
The FSE3D consists of three identical, active broadband dipoles which are aligned perpendicularly to each other. A shielded unit follows, containing the switching and amplifier circuitry, which is directly connected to the N-male output and fed by the Binder-connector with…
The FSHPH is a passive, single-axis H-field probe suited for non-ionizing radiation measurements according to BGV-B11, ICNIRP, IEEE C95.1, FCC 96-236 and others. The FSHPE allows a fast and accurate safety-evaluation of the measurement environment. H-field probe for handheld spectrum…
The FSHPE is a passive, single-axis E-field probe suited for non-ionizing radiation measurements according to BGV-B11, ICNIRP, IEEE C95.1, FCC 96-236 and others. The FSHPE allows a fast an accurate safety-evaluation of the measurement environment. E-field probe for handheld spectrum…