TSUP 8509 – Single path high voltage AMN (LISN)
The main application of the unsymmetrical single path AMN (artificial mains network) TSUP 8509 is the measurement of interference voltage for electromobility purposes according to MBN 10284 in the HF-VHF range 0.1 MHz – 150 MHz utilizing shielded cables.
The impedance characteristics are basically realized by connecting an inductor in parallel with the input impedance of the measurement receiver: 5 µH || 50 Ω.
Each TSUP 8509 can be used to measure one single path. To be able to measure HV+ and HV- 2 units are required. The device under test has to be connected to the terminal at the front panel. The supply voltage has to be connected at the back panel.
The device under test may drain a continuous current of 70 A and for a short period of time it may even drain more than 100 A.
The impedance characteristics are basically realized by connecting an inductor in parallel with the input impedance of the measurement receiver: 5 µH || 50 Ω.
Each TSUP 8509 can be used to measure one single path. To be able to measure HV+ and HV- 2 units are required. The device under test has to be connected to the terminal at the front panel. The supply voltage has to be connected at the back panel.
The device under test may drain a continuous current of 70 A and for a short period of time it may even drain more than 100 A.
| Frequency Range: | 0.1 – 150 MHz |
| Max. cont. current: | 70 A |
| Max. current (limited time) | 100 A |
| Max voltage (DC) | 1000 V |
| Max. voltage (AC 50/60 Hz): | 700 Vrms |
| Impedance: | (5 µH) || 50 Ω (+/- 10%) |
| DC-Resistance mains-EuT: | < 5 mΩ |
| Impedance (50 Hz): | 4.2 mΩ |
| EuT connectors: | screw terminal |
| Measuring port: | BNC-connector |
| Dimensions (W x H x D): | 160 x 165 x 210 mm |
| Weight: | 1.9 kg |