System to test the immunity against magnetic fields acc. MIL-461 G, ISO 11452-8, EN 61000-4-8, SAE J551-17 etc.
The system components will be individually configured for your requirements.
The Schwarzbeck´s Mess-Elektronik MagTest software can be used to perform magnetic field immunity tests according to several standards, such as, for example: MIL-STD-461G, ISO 11452-8, DIN EN 61000-4-8 and many others. The MagTest software can control the hardware to produce…
High power shunt resistor with low inductance. Frequency Range: DC – 250 kHz Resistance values and max. continuous power rating: 2 x 500 mΩ / 400 W; 1 x 1 Ω / 800 W; 1 x 250 mΩ / 800 W; Weight : 13.5 kg Dimensions (W/H/D) : 447 mm x 144 mm x 470 mm Power supply fans : 110/230 VAC 50/60 Hz Datasheet SHUNT 9571
The LFPA 9733 C is a multi-purpose power amplifier and can be used within the frequency range from 5 Hz to 1 MHz. Typical applications are magnetic immunity testing according to automotive standards and MIL-461. Its new output stage design…
High power resistor with low inductance, which can be used in systems where magnetic fields have to be gener-ated. When connected in series between an amplifier and a Helmholtz coil, the current can be measured indirectly. The voltage drop is proportional to the current through the coil. It can be used for testing according to MIL STD 461 (CS101) and ISO 11452 10.
The current sensor CP 9610 can measure up to 40 A in a frequency range from DC – 1 MHz. It is galvanically isolated and can withstand a maximum voltage of 210 VPK / VDC. The internal resistance of the…
The magnetic, handheld field sensor coil FESP 5134-40 was designed to determine the magnetic fieldstrength during immunity tests in conjunction with an appropriate voltmeter. The main application is in the audio frequency range and above up to approx. 250 kHz…
The magnetic, handheld coil FESP 5132 was designed to generate defined magnetic fieldstrength in the audio frequency range up to 100 kHz. The main application is immunity testing against magnetic fields according to EN 55103 and MIL-STD-461 G. Depending on…